HOW TO FLASH A DEAD NOKIA PHONE USING PHOENIX ~ WAPBEAST

HOW TO FLASH A DEAD NOKIA PHONE USING PHOENIX.

Hello dear is me again bobzy koozy and today am going to teach you how to flash a dead nokia phone with a usb cable and phoenix.

REQUIREMENTS

1. Navifirm ware[DOWNLOAD LINK]
2.Phoenix software [Download Link]
3.A usb cable
4. A Nokia phone
5. Time

NOTE

1. Your phone battery should be fully charged.

2.You need to known the exact firmware of the phone you want to flash , cuz phoenix does not check the firmware of the phone thus using a diferent firmware might degrade the phone. That does'nt mean you can't upgrade it back.

3. Just so you don't encounter any problem is adviced that you close any other runing program in your pc.

HOW TO MAKE PHOENIX WORK FOR YOU

Phoenix don't open in some systems directly so if you encounter a problem like this all you need do is left click on the phoenic icon>>> goto properties>>> compatibility now tick the part that sayz run this program as administrator and click on the apply button, after that try runing phoenix again...

How to get the right firmware for your phone
Like i said earlier on using a wrong firmware could damage your phone , so am going to take out some time to explain this. Now there are basically two ways to get a good firmware for your phone:

1. Using Navifirmware
2. Downloading it online

Using Navifirmware is the best way to get a good and compatible firmware for your phone. All you need do is download it, install and run... Now you would have to get the product code of your phone. The product code is something like this 0576447 can be found at the back of your phone or by dialing *#0000# for phones that are not dead. Just insert your product code and click ok and it would start the download .

2. Downloading it from a website. Downloading your firmware from a website could be somewhat complicated cuz some of this firmwares are not complete and might in turn damage your phone . So for best results get your firmwares from this site LINK.

HOW TO FLASH A DEAD PHONE

1. Remove battery from phone.

2. Make sure you extract the downloaded firmware to C:/ProgrameFiles/Nokia/Phoenix/Products/RM-XXX'' e.g rm-463,rm-600 e.t.c make sure the firware is in this formate.

3. Run Phoenix and select ''no connection'' as the connection type

4.Now goto your file menu and select open product.

5.A new window will pop-up with somany product code . E.g rm-xxx rem-600 e.t.c just select the one that tallys with your phone . You can get the product code by dialing *#0000# or by looking at the back of your phone

6. Goto the 'flashing menu' and select 'firmware update'

7. Press "..." button on the top-right corner of the window to select the language pack / product code You want to flash on phone.

8. Now select the product code you want to use to flash or upgrade your phone.

9. Tick dead phone flashing

10.Now scroll down and click on ''option'' i.e the option after sw reset. look carefully you would see a line that is ''red '' in color mark and delete. Press ok . Now click on refurbish.